· How to change your Briggs & Stratton’s engine oil 838,544 views Nov 21, 2012 This video shows you how to change the engine oil in your Briggs & Stratton engine. All you …
How often should I change the oil in my Briggs & Stratton?
This article will discuss how you can check and change the oil on your Briggs & Stratton engine lawnmower! You will need to change the oil in your lawn mower engine every 25-30 hours of use. This is much more often than other engines, and it needs to be done because this type of engine uses a lot less oil than others.
How do you take care of a Briggs and Stratton engine?
Steps to Better Engine Maintenance. For optimum performance, you should change the oil in your small engine after the first five hours of use and then annually, or every 50 hours of use (whichever comes first). Use Briggs & Stratton SAE 30W Oil above 40°F (4°C) for all of our engines. Check oil level regularly.
What kind of oil do you put in a Briggs and Stratton?
Use Briggs & Stratton SAE 30W Oil above 40°F (4°C) for all of our engines. Check oil level regularly. Air-cooled engines burn about an ounce of oil per cylinder, per hour. Fill to mark on dipstick. DO NOT OVERFILL. Start the engine and run it until it is warm.
Does a Briggs and Stratton EXI need an oil change?
While regular scheduled maintenance of your EXI engine will eliminate the need for an oil change, Briggs says it won’t hurt if you do it anyway. ReadyStart® Engine Starting System: No prime, no choke – just pull for power.
See more
Replacing the oil in your Briggs and Stratton Lawnmower:
- ● Step 1: Prepare your Lawn Mower for the Oil Change …
- ● Step 2: Disconnect the spark plug cable …
- ● Step 3: Tilt the mower and set it up …
- ● Step 4: Drain the oil …
- ● Step 5: Replace the oil filter …
- ● Step 6: Check all the connections …
- ● Step 7: Add in new oil and start the engine …
